- Switch to energy-efficient compact fluorescent lamps. They use about 25 percent as much energy and can last ten times longer, saving energy and replacement labor. Add occupancy sensors in rooms that are not occupied constantly, such as conference rooms, lunchrooms and restooms.
- Remove excess lights. Many buildings have more lighting then needed. In some areas, half the light may be sufficient. When removing excess fluorescent tubes, remember to disconnect the ballasts that serve them.
- Install separate switches for smaller areas. Some businesses have dozens of lights controlled by a single switch, and not all are needed at the same time. Have an electrician rewire lights into smaller groups on independent switches.
- Keep the heating and cooling to a minimum. Heating and cooling accounts for half of the total energy use in office buildings. Request the heat set at 65ºF (18ºC) and the air conditioning at 76ºF (24ºC), and use a programmable thermostat to set back the temperature at night, on weekends and holidays.
- Shut computers off at night. A computer or printer can use over 100 watts of power. When replacing computers, purchase new energy-efficient models that use less energy.
- Fax and copy only when really necessary.
- Keep heating vents unobstructed.
- Open freight doors only when needed. As soon as a delivery is complete, close the doors to conserve energy.
- Use rotating doors. When a choice is available, use rotating doors instead of standard hinged or sliding doors. They allow less heat and air conditioning to escape.
- Turn off elevators. On the weekend, in the evening or during holidays a minimum number of elevators likely will be adequate. Turn off extra elevators for annual savings.
- Replace burned-out motors with energy-efficient models. Retrofit building pump and fan motors with variable frequency drives when possible.
for more information & regular update please join us https://www.facebook.com/servostabilizer.in
Comments
Post a Comment