Skip to main content

Ring Main Unit (RMU)

Post a Comment

WHY CARBON BRUSH SERVO VOLTAGE STABILIZER SHOULD BE PREFERRED OVER LINEAR TYPE STABILIZER

Linear Regulator with Linear Roller Assembly                                                                    


Dimmer Regulator with Carbon Brush Assembly

1. This design is non standard as no IS
specification has been drawn out for it.

2.
    

All three phases are controlled with a
single motor and hence not suitable
for unbalanced loads.


3. Roller contact has point contact which
results in high current density causing
sparking & pitting.


4. Wear and tear of carbon rollers due to
friction and that of copper winding due to
pitting.


5. Replacement cost of carbon roller is 
much more.

6. No load losses are very high,so in
case where load is fluctuating from 0 to
100% overall energy losses are more.

7. As losses is on higher side therefore 
requires more quantity of oil which
 increases its size.
for more information please call Akil Siddiqui @ +91-9818596585 or mail us cosmostat@gmail.com 
Website: www.servostabilizer.in
Join us: www.facebook.com/servostabilizer.in
             www.twitter.com/digitalservo
https://digitalservostabilizer.business.site/
1. It is governed by the IS 9815 standard of BIS( Bureau of Indian Standards).

2.



All three phases can be controlled with independent motors and hence can be used for either unbalanced or balanced type.

3.Carbon brush has large area of contact hence current density is very low and gives a smooth operation.


4. Wear & tear is only of carbon brush   which is very cheap & inexpensive.


5. Only brush has to be replaced which is much cheaper.

6. Very low No Load losses with very high efficiency of about 99%.


7. Due to low losses heating is on lower side therefore requires less quantity of oil and size is small and has lower carbon footprints.
Labels:
Location: 216, New Lahore Colony Nr. SDM Court, Shastri Nagar, Geeta Colony, New Delhi, Delhi 110031, India

Comments

Post a Comment

Popular posts from this blog

Electrical Power Substation - Type of Electrical substation

Electrical Substation Now days the electrical power demand is increasing very rapidly. For fulfilling these huge power demands the modern time requires creation of bigger and bigger power generating stations. These power generating stations may be hydro-electric, thermal or atomic. Depending upon the availability of resources these stations are constructed different places. These places may not be nearer to load centers where the actual consumption of power takes place. So it is necessary to transmit these huge power blocks from generating station to their load centers. Long and high voltage transmission networks are needed for this purpose. Power is generated comparatively in low voltage level. It is economical to transmit power at high voltage level. Distribution of electrical power is done at lower voltage levels as specified by consumers. For maintaining these voltage levels and for providing greater stability a number of transformation and switching stations have to be created in
1 comment
Read more

What Is Energy Efficiency Level 2 Transformer ?

High-efficiency transformers make financial benefits for the society. Other than diminished greenhouse gas emanations, they progress reliability and deliver possibly longer benefit life by bringing down temperature rises through energy-efficiency advancements. India has, by presently, received the universal IEC standards as well as presented star naming for chosen categories of transformers. Most power losses happen within the transformer core made up of magnetic steel or within the electrical coils or windings of either aluminum or copper. Copper diminishes load loss, since it could be a more proficient conductor. The significant Indian standard for distribution transformers (DTs) IS:1180/1989 has been changed within the year 2014 as IS:1180 (Part1)/2014 by Bureau of Indian Standard (BIS) subsequently superseding IS:1180 (Portion 1 and 2)/1989 both for fixed and non-sealed sort. This standard advance prescribes numerous reviewing with respect to vitality effectiveness, i.e. three ener
Post a Comment
Read more

Inner View Of 100 KVA Servo Stabilizer

Inner View Of 100 KVA 3 Phase Servo Stabilizer Make: COSMOSTAT Capacity : 100 KVA Input : 300 V - 470 V Output : 415 V Phase : 3Type: Unbalance Cooling : Oil Cooled Winding : 99.9% Pure Copper Termination : Copper For more information please call  Akil Siddiqui  @ +91-9818596585 or mail us  cosmostat@gmail.com Website:  www.servostabilizer.in Join us:  www.facebook.com/servostabilizer.in               www.twitter.com/digitalservo
1 comment
Read more